How to Paint a Front Door
Looking for an easy exterior update? Grab your favorite paint color and get started with your front door makeover!
Supplies Needed
Painters tapeSpongeFine-grit sandpaperTack clothHigh-density foam mini rollers and brushes1 quart adhesion primer1 quart satin or semigloss exterior paint
Step-by-Step Directions
Once you’ve gathered your supplies, it’s time to start painting your front door. Be sure to work in a well-ventilated area.
Step 1: Remove and Prep Door
To paint your front door, we recommend removing the door and placing it on sawhorses outside or in a well-ventilated area. This will prevent drips and runny paint. Before you remove the door, be sure to prep your painting area with a drop cloth. If you plan to paint outside, you’ll also want to check the weather so that surprise rainfalls or extreme heat don’t ruin your hard work. Remove the hardware and hinges with a screwdriver. Be sure to label the pieces of hardware so you can remember exactly where they should be returned. Cover any glass accents or windows with painter’s tape. Editor’s Tip: If you’re not sure what type or color of paint is best for your project, contact your local hardware store to chat with a paint desk associate for help.
Step 2: Sand Surface
Clean the door by scrubbing the surface with a wet sponge, then lightly sand the surface. The sanding will remove any rough spots or dirt, making the surface as clean and smooth as possible for the paint. Once the sanding is finished, wipe down the door again with a damp sponge or tack cloth to remove the dust.
Step 3: Prime Door
Apply adhesion primer to the door using a foam roller in even strokes, working from one end of the door to the other. Use a foam brush to paint any raised or depressed panels. Let dry completely. Editor’s Tip: It’s important to paint the door out of direct sunlight to avoid the paint drying before you have a chance to properly roll or brush it on.
Step 4: Paint Exterior Door in Sections
Next, apply paint. If you have a paneled front door, work in the following order:
Paint trim around panels with a small foam paintbrushPaint any raised or depressed panels with a rollerPaint the center vertical stripPaint all horizontal areasPaint the outermost vertical stripsFinish by painting the vertical side that faces the doorway
Don’t be alarmed if you can see brush and roller marks on the door after the first coat. Once the second coat of paint is on, none of the initial brush and roller marks will be visible. Apply a second coat for a flawless finish.
Step 4: Reinstall the Door
Let your door dry thoroughly before hanging and reattaching the hardware. Finally, enjoy the look of your freshly painted door, and add decorations if you’d like around your entry for even more curb appeal!
